NEWS

The weaving method of straw hats

2024-02-29

The weaving method of straw hats Braid seven strands of wheat straw (such as water grass, wheat straw, bamboo strips, or brown ropes) into a spiral bottom by hand, and then use a straw hat machine to nail it into a straw woven or straw woven hat. Finally, use seven braids of grass to loop the edges around the brim of the hat. Wearing this type of straw hat in summer not only provides shade but also ventilation, making it very cool.

The correct cleaning method for hats

2024-02-29

Washing of hats 1. If there are decorations on the hat, they should be removed first. 2. It is advisable to soak the hat in water and neutral detergent before cleaning. 3. Gently brush with a soft brush. 4. Brush and wash the inner part of the sweat band (in contact with the head ring) several times to thoroughly remove sweat stains and bacteria. Of course, if you are using antibacterial and odor resistant materials? Then this step is waived.

Maintenance and storage methods for hats

2024-02-29

Hats should be carefully maintained and stored. After taking off the hat, do not casually place it. It should be hung on a clothes rack or clothes hook, and do not press heavy objects on it to avoid deformation and deformation. Wearing a hat for a long time can cause oil stains and dirt on the inside and outside of the hat. It should be washed off in a timely manner. The lining of the hat can be removed, washed, and then stretched to prevent the sweat and dirt on the lining from getting damp and moldy, which will affect the lifespan of the hat. The dust on the hat needs to be brushed regularly. The sludge and oil stains adhering to the cap surface can be gently brushed with a soft brush dipped in hot soapy water, and then washed with clean water.

What are the main requirements for customizing the back strap and hole of a hat?

2024-02-29

The hat customization process consists of multiple steps, and the production of the back strap and bag hole is also one of them. Any high-quality hat customization cannot be achieved without continuous improvement in each step. So, what are the main requirements for customizing the back strap and hole of a hat? The requirements for the back strap vary depending on the type of selection. For example, for the burr buckle: the length and width of the burr strap are consistent, with a tangent of 0.1CM, a right angle needle turning, and the burr strap is aligned with the fabric strap, with a width of 2CM;